Factory Settings For Orbi Satellite Model Rbs10 - NETGEAR Orbi LBR1020 User Manual

Table 4. Factory default settings for the router (Continued)
Feature
Time zone
Time zone adjusted for daylight
saving time
SNMP
Firewall
Inbound (communications coming
in from the Internet)
Outbound (communications going
out to the Internet)
Source MAC filtering
WiFi
WiFi communication
SSID name
Security
Broadcast SSID
Transmission speed
Country/region
RF channel 2.4 GHz fronthaul
RF channel 5 GHz fronthaul
Factory Settings for Orbi Satellite Model
RBS10
The following table shows the factory default settings for the satellite.
Supplemental Information
Orbi 4GX Router Model LBR1020
Default Setting
GMT for WW except NA and GR
GMT+1 for GR
GMT-8 for NA
Disabled
Disabled
Disabled (except traffic on port 80, the HTTP port)
Enabled (all)
Disabled
Enabled
See router label
WPA2-PSK (AES)
Enabled
Auto
Note: Maximum wireless signal rate derived from IEEE Standard 802.11
specifications. Actual throughput can vary. Network conditions and
environmental factors, including volume of network traffic, building
materials and construction, and network overhead, lower actual data
throughput rate.
Australia.
Auto
Channel 48 for NA, PR, AU, CA, and TW
Channel 36 for EU, KO, JP, and IN
166 User Manual