Enable Or Disable Daisy-Chain Topology - NETGEAR Orbi LBR1020 User Manual

A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Attached Devices.
The Attached Devices page displays.
5. Select a connected device that displays on the page.
The Edit Device page displays.
6. To change the device model, enter a new model in the Device Model field.
7. To change the device name, enter a new name in the Device Name field.
8. Click the APPLY button.
Your settings are saved.

Enable or disable daisy-chain topology

Daisy-chain topology allows your Orbi satellite to connect to other Orbi satellites. This
feature only applies if you own one Orbi router and two or more Orbi satellites. If you
disable this feature, your Orbi satellites can connect only to your Orbi router. This feature
is enabled by default.
Note: Enabling or disabling this feature causes all your Orbi devices to reboot.
To enable or disable daisy-chain:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Advanced Wireless Settings page displays.
Set Up and Manage an Optional
Orbi Satellite
Orbi 4GX Router Model LBR1020
148 User Manual