Orbi Ac Satellite Led Behavior; Place Your Satellite; Sync An Add-On Satellite - NETGEAR Orbi LBR1020 User Manual

Orbi AC satellite LED behavior

An Orbi AC satellite has a Power LED on the back and a Ring LED on the top.
The following table describes the LED behavior.
Note: The Orbi AC satellite model RBW30 does not include a Power LED.
Table 3. LED behavior for Orbi AC satellite
LED color Description
Pulsing white Router is booting or Sync (WPS) button has been pushed.
Solid blue Internet connection is established.
Solid amber Unable to connect to internet.
Pulsing red The satellite's firmware is corrupted.
White and orange 88% to 99% of data is used.
pulse
White and red pulse 100%+ of data is used.
Off Power is not supplied

Place your satellite

Your satellite must be within range of your router's WiFi signal in order for it to sync with
the router. Use the satellite's ring LED to help you determine where to place your satellite.

Sync an add-on satellite

If you already set up the router and are adding an optional add-on satellite (sold
separately), follow these steps.
To sync your add-on satellite:
1. Place your satellite.
Make sure that your satellite is within range of your router's WiFi signal.
2. Connect the satellite to a power source.
Set Up and Manage an Optional
Orbi Satellite
Orbi 4GX Router Model LBR1020
142 User Manual