Remove A Service Or Application For Port Forwarding - NETGEAR Orbi LBR1020 User Manual

The page displays the Port Forwarding radio buttons.
6. Select the Enable radio button.
The Port Forwarding table displays.
7. Add a service or application for port forwarding:
a. In the Label field, enter a name for the service or application.
b. In the IP field, enter the IP address for the computer that provides the service or
runs the application.
c. In the Port field, enter the port number that is associated with the service or
application.
d. From the Protocol menu, select the protocol (TCP or UDP) that is associated
with the service or application.
e. Click the + button.
Your settings are saved and the service or application is added to the Port
Forwarding table.
8. To add another service or application for port forwarding, repeatStep 7.
9. Click the Submit button.
The modem resets to activate the new settings. Any devices that are connected to
the modem are disconnected when the modem resets.

Remove a Service or Application for Port Forwarding

You can remove a service or application that you no longer need for port forwarding.
Secure Your Network
Orbi 4GX Router Model LBR1020
59 User Manual