Set Your Time Zone, Adjust For Daylight Saving Time, Or Change The Ntp Server - NETGEAR Orbi LBR1020 User Manual

8. If your ISP charges for extra data volume when you make a new connection, enter
the extra data volume in MB in the Round up data volume for each connection by
field.
9. In the Traffic Counter section, set the traffic counter to begin at a specific time and
date.
To start the traffic counter immediately, click the Restart Counter Now button.
10. If you want the router to issue a warning message before the monthly limit of Mbytes
or hours is reached, in the Traffic Control section, enter a numeric value.
By default, the value is 0 and no warning message is issued.
11. To stop the Internet connection when the limit is attained, select the Disconnect
and disable the Internet connection check box.
12. Click the Apply button.
The Internet Traffic Statistics section helps you to monitor the data traffic.
13. To update the Internet Traffic Statistics section, click the Refresh button.
14. To display more information about the data traffic on your router and to change the
poll interval, click the Internet Traffic Status button.
Set your time zone, adjust for daylight saving
time, or change the NTP server
When you set up the router, you are specifying the time zone. You can specify another
time zone and adjust for daylight saving time. By default, the router gets its time from
a NETGEAR Network Time Protocol (NTP) server. However, you can specify another
NTP server.
To set your time zone, adjust for daylight saving time, or change the NTP server:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
Manage Your Network
Orbi 4GX Router Model LBR1020
116 User Manual