How To Use Marks; How To Select A Mark Type - Furuno FAR-1513-BB Operator's Manual

1.41

How to Use Marks

[MARK MENU]
1 ORIGIN MARK
STAB GND / STAB SEA
2 MARK KIND
ORIGIN MARK(No.) /
ORIGIN MARK(SYM) /
MAP MARK /
WP 1~50 /
WP 51~98 /
8 MARK POSITION
CURSOR / OS / L/L
9 MARK COLOR
RED / GRN / BLU / YEL /
CYA / MAG / WHT
0 MAP•MARK MENU
Presentation mode
HEAD UP RM/STERN UP
RM/STAB HEAD UP RM
COURSE UP RM/NORTH
UP RM/NORTH UP TM
1.41.1

How to select a mark type

1. Select the [MARK] box at the bottom of the screen, then press the right button to
open the [MARK] context menu.
2. Select [MARK KIND], then push the ADJUST knob.
3. Select the appropriate type of marker, referring to the table below, then push the
ADJUST knob.
Mark kind
[ORIGIN MARK(No.)]
[ORIGIN MARK(SYM)]
[MAP MARK]
[WP1-50]
[WP51-98]
4. Close the menu.
Select the [MARK] box at the bottom of the screen then
press the right button to open the [MARK] context
menu.
Marks can be entered at any location inside the opera-
tional display area, however, no mark can be entered at
the location of an on-screen box. A total of 5,000 marks
can be inscribed at any one time.
You can mark any prominent target or a point of partic-
ular interest using the mark feature.
Note: The location and orientation of mark symbols and
mark lines can change, depending on the display pre-
sentation mode, as shown in the table below.
Mark symbol
Location is changed ac-
cording to heading and own
ship position.
Orientation is unchanged.
Location is changed ac-
cording to own ship posi-
tion.
Orientation is unchanged.
Description
Inscribes the standard origin mark symbol, with mark
number.
Inscribes the standard origin mark symbol, without mark
number.
Inscribes the selected map mark.
Inscribes waypoint marker 1 through 50.
Inscribes waypoint marker 51 through 98.
1. OPERATIONAL OVERVIEW
Mark line
Location and orientation
are changed according to
heading and own ship posi-
tion.
Location and orientation
are changed according to
own ship position.
1-57