Furuno FAR-1513-BB Operator's Manual page 170

APPENDIX 3 ALERT CODES, MESSAGES AND MEANINGS
Alert ID Alert title
194,6 SYSTEM ERROR
Remedy: Press the ALERT ACK key. Restore signal or rectify reason for signal loss.
194,7 SYSTEM ERROR
Remedy: Press the ALERT ACK key. Restore signal or rectify reason for signal loss.
194, 11 SYSTEM ERROR
Remedy: Consult your dealer to assign the radar number correctly. The radar will need to be restart-
ed after changing the radar number.
51495,1 ANCHOR WATCH
Remedy: Press the ALERT ACK key. Confirm Own Ship location and adjust as necessary.
51540,1 AIS MSG
Remedy: Press the ALERT ACK key. Check power to AIS unit.
51540,2 AIS MSG
Remedy: Press the ALERT ACK key. No other action required.
51560,1 ASSOCIATION
Remedy: Press the ALERT ACK key. Set [ASSOCIATION] to [OFF].
51601,1 SENSOR ERROR
Remedy: Press the ALERT ACK key. Match the on-screen indication with the actual gyrocompass.
51601,2 SENSOR ERROR
Remedy: Press the ALERT ACK key. Check SDME sensor. Use a different sensor if necessary.
51601,3 SENSOR ERROR
Remedy: Press the ALERT ACK key. Check SDME sensor. Use a different sensor if necessary.
51601,4 SENSOR ERROR
Remedy: Press the ALERT ACK key. Restore the signal. This indication cannot be erased if the
position signal is missing. The indication is automatically removed when the signal is restored.
51601,5 SENSOR ERROR
Remedy: Press the ALERT ACK key. Use the WGS-84 datum.
51601,6 SENSOR ERROR
Remedy: Press the ALERT ACK key. Restore the signal to remove this indication.
AP-12
Priority &
Category
Warning Message: "PM COM ERROR"
Cat: B Meaning: PM communication error.
Warning Message: "TUNE ERROR"
Cat: B Meaning: TUNE error due to faulty settings or mal-
function.
Warning Message: "LAN NETWORK ERROR"
Cat: B Meaning: Multiple equipment has the same IP ad-
dress as this radar.
Warning Message: "OUT OF ANCH ZONE"
Cat: B Meaning: Ship position outside set anchor watch
zone.
Caution Message: "TRANSMIT ERROR"
Cat: B Meaning: Unable to transmit AIS binary message.
Caution Message: "AIS TRANSMITTING"
Cat: B Meaning: Transmitting AIS message.
Caution Message: "NOW ASSOCIATING"
Cat: B Meaning: One or more sets of associated targets
is displayed.
Warning Message: "NO GYRO SIGNAL"
Cat: B Meaning: No heading information received from
gyrocompass for five seconds.
Warning/ Message: "NO LOG(WT) SINGAL"
Caution
Meaning: No speed data received for five seconds
Cat: B when [LOG(WT)] is set as speed reference.
Warning/ Message: "NO LOG(BT) SIGNAL"
Caution Meaning: No speed data received for thirty sec-
Cat: B onds when [LOG(BT)] is set as speed reference.
Warning Message: "NO EPFS SIGNAL"
Cat: B Meaning: EPFS Error. No speed or position data
received from EPFS device for thirty seconds.
Warning Message: "POSITION DATUM UNKNOWN"
Cat: B Meaning: DTM sentence not received for thirty
seconds, or erroneous data received.
Warning Message: "NO UTC SIGNAL"
Cat: B Meaning: UTC error. No date or time data received
for thirty seconds. No ZDA sentence input.
Message and meaning