Mounting Your Tv To The Wall - RCA L32FHDF11 User Manual

For models L46FHDFE9A
This model comes with the table stand attached. If you want to mount your TV to the wall, remove the
table stand by following the instructions below.
Step 1
Place the plastic bag off the TV and
place it on a table or other flat surface.
Place the TV set face down on the TV
bag.
Step 3
Attach the stand cap to the TV
cabinet.

Mounting Your TV to the Wall

If you want to mount your TV to the wall, first remove the table stand from the TV's back cabinet as
shown above:
To mount your TV to the wall, purchase a VESA wall
Model L32FHDF11
Models L40FHDF11/L40FHDF11
/L46FHDF11
Model L46FHDE9A
The VESA number is the horizontal and vertical measurement of the mounting holes. For example,
200x100 refers to fact that the mounting measurements are 200mm horizontally and 100mm vertically.
Follow the directions included with the wall mount to mount the TV to the wall.
Caution: Your wall mount must be able to bear a minimum of five times the TV's net weight to avoid causing damage.
Step 2
Remove the table stand from the TV
cabinet. Use a screwdriver to remove
the four M5 ST-screws.
TV cabinet with stand cap attached.
Purchase a VESA 200 x100, Size M4
Purchase a VESA 400 x400, Size M6
Purchase a VESA 600 x400, Size M4
7
4
screw
screw
screw