Daikin BRC3E52C Operation Manual page 38

Menu Manipulation
„Setpoint Range Setting
Operation Method
1
Energy Saving Options
Energy Saving List
Setpoint Range
Setback Condition
Sensing Sensor(Low)
Sensing Sensor(Stop)
Setpoint Auto Reset
Return Setting
2
Setpoint Range
Cool
16°C – 32°C
Heat
16°C – 32°C
Return Setting
Note
• The default setpoint range restriction is [16°C→32°C]. This setpoint range is the general
setpoint range and is as a result always active regardless of whether Setpoint Range is
enabled or disabled.
• The default setpoint range for setback operation is [33°C→37°C] for cooling and [10°C→15°C]
for heating. This setpoint range cannot be changed.
3
Setpoint Range
Save the settings?
Yes No
Return Setting
Operation manual
37
This function should not be used when a centralised controller is connected.
• Display the Energy Saving Options (See
1/2
Saving List" on page
• Press the
Setpoint Range
button.
• Press the
cooling or heating temperature setpoint range.
• Move the cursor using the
buttons.
• Press the Menu/Enter button when all changes are
made. The confirmation screen will appear.
• Press the
• Press the Menu/Enter button to confirm the
settings and to return to the Basic Screen.
36).
(Up/Down) buttons to select
and press the Menu/Enter
(Up/Down) buttons to change the
(Left/Right)
(Left/Right) buttons to select
"Energy
Yes .
BRC2E52C7 / BRC3E52C7
4P368042-1 - 2014.02