Daikin BRC3E52C Operation Manual page 21

Selection Settings
2
28
28
Operation Method
3
28
BRC2E52C7 / BRC3E52C7
4P368042-1 - 2014.02
The display " " (changeover under control) will blink when the power is
turned ON for the first time.
• Press the Operation Mode Selector button of the
remote controller for which the selection eligibility
needs to be set.
°C
The cooling/heating selection eligibility will be set
and the icon "
will disappear.
The icon "
appear on the other remote controllers.
°C
• Press the Operation Mode Selector button on the
remote controller that has the cooling/heating
selection eligibility (or the remote controller without
°C
the icon "
several times until the desired mode is selected.
The display will change to the "Fan", "Dry", "Auto",
"Cool" or "Heat" icon each time the button is
pressed.
• Simultaneously, the other remote controllers with
no selection right will follow and change the
display automatically.
" (Changeover under control)
" (Changeover under control) will
" (Changeover under control))
Basic Operation Method
Operation manual
20