Basic Operation Method
Cool/Heat Selection Eligibility
• "Cool", "Heat" or "Auto" mode can only be set by the remote controller for which the cooling/
heating selection eligibility is set.
The remote controller with
the selection eligibility
1.
(without "
(Changeover under
control) displayed)
The remote controller with
the selection eligibility
2.
(without "
(Changeover under
control) displayed)
Operation manual
21
Set to "Cool", "Heat",
"
"Dry" or "Auto" mode.
Set to "Fan" mode.
"
Other remote controllers
(with "
"
(Changeover under
control) displayed)
• The air conditioner will go into the
mode set in the remote controller with
the selection eligibility. No other modes
are available.
• The air conditioner, however, can be
switched to Fan Only mode or from
Cool to Dry mode.
Other remote controllers
(with "
"
(Changeover under
control) displayed)
• The air conditioner cannot be set to
other modes except Fan Only mode.
BRC2E52C7 / BRC3E52C7
4P368042-1 - 2014.02