Table of Contents
Advertisement
3.3.7.
Ping Execution
Select "System Tools" and "Ping Execution" to open the screen shown in Figure 3-
57. On this screen, you can check communications by sending pings to other
devices connected to this switch.
Screen Description
Target IP Address
Number of Request Displays the number of times a ping is to be sent. The factory default setting is
Timeout Value
Figure 3-57 Ping Execution
Displays the IP address of the target to which a ping is sent. "0.0.0.0" is the
factory default setting.
10.
Displays the timeout time. The factory default setting is 3 seconds.
86
Advertisement
Table of Contents
