Power Saving Port Configration - Panasonic PN28080i-TH Operation Manual

3.1.11. Power Saving Port Configration

Select "Basic Config" and "Port Config" and then "Power Saving Port Config" to
open the screen shown in Figure 3-11. On this screen, you can configure the power
saving settings of ports.
Screen Description
Target Port Select- Select multiple target ports for configuring settings at a time.
ing Click the "Select All" button, and all ports will be selected.
Click the "Reset" button, and all ports will be deselected.
Click the "Set selected port (s) " button after selecting and changing the items
for configuring settings at a time, and the same settings will apply to the
selected ports.
Port Number Displays the port number.
Type Displays the port type.
1000T
1000X
Link Status Displays the current link status.
Up
Down
Figure 3-11 Power Saving Port Configration
The port type is 1000BASE-T.
The port type is SFP expansion port.
A link has been established successfully.
A link has not been established.
32