3.2.11. In-Profile Action Config
Select "Advanced Config," and then "In-Profile Action Config" to open the screen
shown in Figure 3-36. On this screen, you can configure the in-profile settings.
Screen Description
Total Entry
Displays the number of created In-profiles (number of indexes) .
ID
Displays the index number of an In-profile.
Behavior
Displays whether to deny or permit packets.
Deny
Permit
Policed-DSCP
Marks the DSCP value.
Policed-
Marks the precedence value.
Precedence
Policed-CoS
Marks the CoS value.
Figure 3-36 In-Profile Action Config
Denies packets.
Permits packets.
63