Whirlpool WFW9620HW0 Use And Care Manual page 14

Drying Function (Step 10)
10.
Select drying function, if desired
4:28
What to Wash
REGULAR
Temperature Spin Speed
WARM EXTRA FAST
From the home screen, touch the "Drying Mode" area of
the screen to show the available Drying Mode settings.
From the Drying Mode screen, choose between Automatic
Drying and Timed Drying. For Automatic Drying, touch AUTO
DRY; then touch the screen to choose between Damp Dry,
Dry, and Extra Dry. For Timed Drying, touch TIMED DRY; then
touch the screen to choose from among 240 min, 270 min,
300 min, 330 min, and 360 min. Expect longer drying times
than with traditional vented dryers.
14
†
3:15
How to Wash
NORMAL
Auto Dry
Dry
To run a dry cycle only:
Load the drum half full or less for optimal drying performance and
cycle time. From the home screen, touch the "Drying Mode" area
of the screen to show the available Drying Mode settings, and
from the Drying Mode screen, after making the Automatic Drying
or Timed Drying choices as mentioned above, touch "DRYING
ONLY ON." Do not open the door during the drying cycle.
NOTE: The washer will spin at high speed prior to running the
dry cycle.
IMPORTANT:
■ Do not use dryer sheets.
■ Do not dry comforters or large blankets.
11.
Select options, if desired
From the home screen, touch the Options icon (at upper right
of screen) and the Options screen will show Soil Level, Extra
Rinse, Pre-Soak, FanFresh
selections. Previously selected "What to Wash" and "How to
Wash" options will be shown on the screen. Touch the screen for
each option to change its setting.
Soil Level Option
The recommended soil level is preset for each cycle. The Soil
Level option allows you to select a Light, Normal, or Heavy soil
level setting. Some preset soil levels can be changed. For heavily
soiled and sturdy fabrics, select the Heavy soil level setting.
For lightly soiled and delicate fabrics, select the Light soil level
setting. Lower soil level settings will help reduce tangling and
wrinkling.
Extra Rinse Option
The Extra Rinse option provides an additional rinse to the
selected cycle.
Pre-Soak Option
The Pre-Soak option can be set for 30 min, 1 hr or 8 hrs.
FanFresh Option
®
The FanFresh option will periodically tumble the load after the
®
end of the cycle for up to 12 hours. Touch FAN FRESH to activate
this option. This option is not available when a drying mode
is selected. FanFresh may be ended at any time by touching
®
the "X" on the touch screen to the right of the estimated time
remaining.
Steam Clean Option
The Steam Clean option adds additional soak and wash time
to many cycles to help remove tough stains, as well as a steam
boost for added cleaning power. An integrated heater helps to
maintain optimal wash temperatures. See the "Cycle Guide" for
cycles that allow the Steam Clean option.
Wrinkle Shield Option
™
The Wrinkle Shield option is only available when a drying mode
™
is selected, and will periodically tumble the load after the end
of the cycle for up to 12 hours. Wrinkle Shield
at any time by touching the "X" on the touch screen to the right
of the estimated time remaining.
† Not all options and settings are available with all programs/cycles.
See "Cycle Guide" for available options and settings.
†
, Steam Clean, and Wrinkle Shield
®
may be ended
™
™