Table of Contents
Advertisement
9.2
Soft Dry Operation
Soft Dry Operation can be set using remote control.
Soft Dry operation is applied to dehumidify and to perform a gentle cooling to the room.
When selecting Soft Dry operation, the operation will be cooling until the room temperature reaches the set
temperature on remote control, and then soft Dry will be activated.
The Soft Dry operation runs for less tan 10 minutes and once stop it will not be activated within 6 minutes.
Dry operation area is shown as follows:-
9.2.1
Time Graph for Soft Dry operation
9.3
Automatic operation
Automatic operation can be set using remote control.
Operation mode is determined by set temperature of remote control, indoor intake temperature.
This operation starts to operate with indoor fan at SLo speed for 20 seconds to judge the intake air temperature.
After judged the temperature, the operation mode is determined by referring below standard.
20
Advertisement
Table of Contents
