Maintenance Page Defination; Maintenance/Network Settings - Grandstream Networks GXV3240D Administration Manual

MAINTENANCE PAGE DEFINATION

MAINTENANCE/NETWORK SETTINGS

Address Type
DHCP Host name (Option 12)
DHCP Vendor Class ID
(Option 60)
IP Address
Subnet Mask
Default Gateway
DNS Server 1
DNS Server 2
PPPoE Account ID
PPPoE Password
Alternate DNS Server
Second Alternate DNS Server
Enable LLDP
Layer 3 QoS for SIP
Layer 3 QoS for Audio
Layer 3 QoS for Video
Layer 2 QoS 802.1Q/VLAN
Tag
Layer 2 QoS 802.1p Priority
Value
PC Port VLAN Tag
Firmware Version 1.0.1.54
Allows users to configure the appropriate network settings on the
phone. Users could select "DHCP", "Static IP" or "PPPoE". By default,
it is set to "DHCP".
Specifies the name of the client. This field is optional but may be
required by some Internet Service Providers.
Used by clients and servers to exchange vendor class ID. The default
setting is GXV.
Enter the IP address when static IP is used.
Enter the Subnet Mask when static IP is used.
Enter the Default Gateway when static IP is used.
Enter the DNS Server 1 address when static IP is used.
Enter the DNS Server 2 address when static IP is used.
Enter the PPPoE account ID.
Enter the PPPoE Password.
Enter the alternate DNS server address.
Enter the second alternate DNS server address.
Enable/Disable LLDP on the phone. The default setting is "Yes".
Defines the Layer 3 QoS parameter for SIP packets. This value is
used for IP Precedence, Diff-Serv or MPLS. The default setting is 48.
Defines the Layer 3 QoS parameter for audio packets. This value is
used for IP Precedence, Diff-Serv or MPLS. The default setting is 48.
Defines the Layer 3 QoS parameter for video packets. This value is
used for IP Precedence, Diff-Serv or MPLS. The default setting is 48.
Assigns the VLAN Tag of the Layer 2 QoS packets for LAN port. The
default value is 0.
Assigns the priority value of the Layer2 QoS packets for LAN port.
The Default value is 0.
Assigns the VLAN Tag of the Layer 2 QoS packets for PC port. This
tags the VLAN tag value on the target address received from the LAN
port of the phone then sends the value to the device connected to the
PC port.
Note:
VLAN tag value on the device connected to the PC port should be the
GXV3240D Administration Guide Page 57 of 83