Maintenance/Syslog; Maintenance/Logcat - Grandstream Networks GXV3240D Administration Manual

Auto Reboot to Upgrade
Without Prompt
Authenticate Conf File
Factory Reset

MAINTENANCE/SYSLOG

Syslog Server
Syslog Level

MAINTENANCE/LOGCAT

Clear Log
Log Tag
Log Priority
Firmware Version 1.0.1.54
If set to "Yes", the phone will automatically start upgrading after
downloading the firmware files. Otherwise, users would need confirm in
the prompted message in LCD to start upgrading process. The default
value is "Yes".
Authenticates configuration file before acceptance. The default setting is
"No".
Click "Reset" to restore to factory default settings. Users can select to
clear the SD card in phone' storage for factory reset.
The URL/IP address for the syslog server. The default setting is
"log.ipvideotalk.com".
Selects the level of logging for syslog. The default setting is
"None".There are 4
ERROR.Syslog messages are sent based on the following events:

Product model/version on boot up (INFO level);

NAT related info (INFO level);

Sent or received SIP message (DEBUG level);

SIP message summary (INFO level);

Inbound and outbound calls (INFO level);

Registration status change (INFO level);

Negotiated codec (INFO level);

Ethernet link up (INFO level);

SLIC chip exception (WARNING and ERROR levels);

Memory exception (ERROR level).
Press the clear log button to clear log.
Specifies the log tag to filter the log.
Selects the log priority. The log priority options are: Verbose, Debug,
GXV3240D Administration Guide
levels:DEBUG, INFO, WARNNING AND
Page 62 of 83