Network → WiFi Settings (Available on GRP2612W & GRP2614 & GRP2615 & GRP2616 only)
Enable/Disable WiFi
Country
Access Point
(1 - 10)
Maintenance Page Definitions
Maintenance → Web Access
User Password
New Password
Confirm Password
Admin Password
Current Password
New Password
Confirm Password
Maintenance → Upgrade and Provisioning
Firmware Upgrade
and Provisioning
Always Authenticate
Before Challenge
Validate Hostname
in Certificate
Allow DHCP Option
43 and Option 66
Override Server
Enables / Disables the WiFi on the phone. Three options are available:
•
No: Disables WiFi. User has ability to enable WiFi from LCD Menu.
•
Off & Hide Menu from LCD: Disables WiFi and hides "WiFi
Settings" menu from phone LCD.
•
Yes: Enables WiFi to connect to WiFi network.
Default setting is "No".
Specifies the Wi-Fi encryption type.
SSID
Enters WiFi SSID name to connect.
Configures the authentication password to access WiFi
Password
Network.
Specifies the WiFi encryption type. The available options are
Security
the following: None, WEP, WPA, WPA Enterprise and Auto.
Type
Default settings is None.
Table 13 : Maintenance Page Definitions
Set new password for web GUI access as User. This field is case sensitive.
Enter the new User password again to confirm.
The current admin password is required for setting a new admin password.
Set new password for web GUI access as Admin. This field is case sensitive.
Enter the new Admin password again to confirm.
Specifies how firmware upgrading and provisioning request to be sent: Always
Check for New Firmware, Check New Firmware only when F/W pre/suffix
changes, Always Skip the Firmware Check.
The default setting is "Always Check for New Firmware".
Only applies to HTTP/HTTPS. If enabled, the phone will send credentials
before being challenged by the server. The default setting is "No".
Allows to validate the hostname in the SSL certificate.
The default setting is "No".
DHCP option 66 originally was only designed for TFTP server. Later on, it was
extended to support an HTTP URL. GRP phones support both TFTP and HTTP
server via option 66. Users can also use DHCP option 43 vendor specific
option to do this.
GRP2600 Administration Guide
Version 1.0.5.15
P a g e
|
93