Table of Contents
Advertisement
10 Configuration
10
Configuration
10.1
Outdoor unit
10.1.1
Overview: Configuration
This chapter describes what you have to do and know to configure
the system after it is installed.
INFORMATION
Gas boiler. Depending on the installed gas boiler, settings
will be visible/invisible.
▪ By default, only the settings applicable for the third-
party gas boiler are displayed.
▪ When the unit detects communication from the
NHY2KOMB28+32AA gas boiler, all settings applicable
for
the
NHY2KOMB28+32AA
automatically displayed.
Why
If you do NOT configure the system correctly, it might NOT work as
expected. The configuration influences the following:
▪ The calculations of the software
▪ What you can see on and do with the user interface
How
You can configure the system via the user interface.
▪ First time – Quick wizard. When you turn ON the user interface
for the first time (via the outdoor unit), a quick wizard starts to help
you configure the system.
▪ Afterwards. If necessary, you can make changes to the
configuration afterwards.
INFORMATION
When the installer settings are changed, the user interface
will request to confirm. When confirmed, the screen will
shortly turn OFF and "busy" will be displayed for several
seconds.
Accessing settings – Legend for tables
You can access the installer settings using two different methods.
However, NOT all settings are accessible via both methods. If so,
the corresponding table columns in this chapter are set to N/A (not
applicable).
Method
Accessing settings via the breadcrumb in the
menu structure.
Accessing settings via the code in the
overview settings.
See also:
▪
"To access the installer settings" on page 56
▪
"10.1.5 Menu structure: Overview installer settings" on page 71
To access the most used commands
To access the installer settings
1 Set the user permission level to Installer.
2 Go to [A]:
> Installer settings.
To access the overview settings
1 Set the user permission level to Installer.
Installer reference guide
56
2 Go to [A.8]:
To set the user permission level to Installer
1 Set the user permission level to Adv. end user.
2 Go to [6.4]:
3 Press
4 If you do NOT press any button for more than 1 hour or press
To set the user permission level to Advanced end user
1 Go to the main menu or any of its submenus:
2 Press
Result: The user permission level switches to Adv. end user.
gas
boiler
are
Additional information is displayed and "+" is added to the menu title.
The user permission level will stay in Adv. end user until set
otherwise.
To set the user permission level to End user
1 Press
Result: The user permission level switches to End user. The user
interface will return to the default home screen.
To modify an overview setting
Example: Modify [1‑01] from 15 to 20.
1 Go to [A.8]:
2 Go to the corresponding screen of the first part of the setting by
00
04
08
0c
Column in tables
3 Go to the corresponding second part of the setting by using the
#
For example:
[A.2.1.7]
Code
00
04
For example: [C-07]
08
0c
4 Modify the value by using the
00
04
08
0c
5 Repeat previous steps if you have to modify other settings.
> Installer
settings.
> Information > User permission level.
for more than 4 seconds.
Result:
is displayed on the home pages.
again for more than 4 seconds, the installer permission level
switches back to End user.
for more than 4 seconds.
for more than 4 seconds.
> Installer
settings.
using the
and
button.
INFORMATION
An additional 0-digit is added to the first part of the setting
when you access the codes in the overview settings.
Example: [1‑01]: "1" will result in "01".
Overview settings
01
00
01
15
02
00
03
05
06
07
09
0a
0b
0d
0e
0f
Confirm
Adjust
Scroll
and
button.
Overview settings
01
00
01
15
02
00
03
05
06
07
09
0a
0b
0d
0e
0f
Scroll
Confirm
Adjust
Result: The value to be modified is now highlighted.
Overview settings
01
00
01
20
02
00
03
05
06
07
09
0a
0b
0d
0e
0f
Confirm
Adjust
Scroll
EJHA04AAV3 + NHY2KOMB28+32AA
settings > Overview
.
settings > Overview
00
00
and
button.
00
Daikin Altherma H Hybrid
4P556861-1A – 2019.05
Advertisement
Table of Contents
