Connecting Other Devices; Connecting A Device Compatible With The Trigger Function; Connecting The Power Cable - Yamaha MusicCast RX-V1083 Owner's Manual

5

Connecting other devices

Connect a device compatible with the trigger function.
Connecting a device compatible with the trigger
function
The trigger function can control an external device in conjunction with operating the unit (such
as powering on/off and input selection). If you have a Yamaha subwoofer that supports a
system connection or a device with a trigger input jack, you can use the trigger function by
connecting the external device to one of the TRIGGER OUT jacks with a monaural mini-plug
cable.
TRIGGER OUT 1-2 jacks
The unit (rear)
TRIGGER
OUT
HDMI (HDCP2.2) NETWORK
( 3 NET )
3 AV 4 AV 5 AV 6 AV 7
1
TRIGGER 12V 0.1A
OUT
MAX. TOTAL
1
REMOTE RS-232C
12V 0.1A
IN OUT
MAX. TOTAL 2
2
E OUT
(SINGLE)
1
2
ROUND SUR. BACK SUBWOOFER CENTER
SPEAKERS
EXTRA SP2 EXTRA SP1
R L R L CENTER R FRONT L
SURROUND BACK
F.PRESENCE
SINGLE
ZONE 2 ZONE 2/BI-AMP
X
You can configure the trigger function settings in "Trigger Output1" and "Trigger Output2" (p.137) in the "Setup"
menu.
System connector
jack
Yamaha subwoofer that
supports a system connection
En
6

Connecting the power cable

After all the connections are complete, connect the supplied power cable to the unit and then
to an AC wall outlet.
The unit (rear)
NETWORK
( 3 NET )
AC IN
OTE RS-232C
OUT
CENTER R FRONT L
40
To an AC wall outlet