Yamaha MusicCast RX-V1083 Owner's Manual page 111

■ Rename/Icon Select
Changes the input source name and icon displayed on the front display or TV screen.
X
Some network input sources (such as "AirPlay") cannot be renamed or have the icons changed.
■ Setup procedure
1
Use the cursor keys (e/r) to select "Auto" or "Manual" and press the cursor key (w).
If you select "Auto", the unit creates a name automatically according to the connected device. In
this case, skip Steps 3 and 4.
X
This step is available only when "AV1-7", "VIDEO AUX" or "AUDIO1-3" (available only when any audio digital
input jack is assigned) is selected.
2
Use the cursor keys (e/r) to select an icon and press the cursor key (w).
3
Press ENTER to enter the name edit screen.
4
Use the cursor keys and ENTER to rename and select "ENTER" to confirm the entry.
X
To clear the entry, select "CLEAR".
5
Use the cursor keys to select "OK" and press ENTER.
X
To restore the default setting, select "RESET".
6
To exit from the menu, press ON SCREEN.
■ Decoder Mode
Sets the format of digital audio playback to "DTS".
For example, if the unit does not detect DTS audio and outputs noise, set "Decoder Mode" to
"DTS".
Input sources
AV 1-7, VIDEO AUX, AUDIO 1-3 (available only when any audio digital input jack is assigned)
Settings
Auto Automatically selects an audio format to match the input audio signal.
DTS Selects DTS only. (Other audio signals are not reproduced.)
■ Volume Interlock
Enables/disables volume controls from iTunes/iPod via AirPlay.
Input sources
AirPlay
Settings
Off Disables volume controls from iTunes/iPod.
Enables volume controls from iTunes/iPod within the limited range (-80 dB to -20
Limited
dB and mute).
Enables volume controls from iTunes/iPod in the full range (-80 dB to +16.5 dB
Full
and mute).
■ DMC Control
Selects whether to allow DLNA-compatible Digital Media Controller (DMC) to control playback.
Input source
SERVER
Settings
Disable Does not allow DMCs to control playback.
Enable Allows DMCs to control playback.
X
A Digital Media Controller (DMC) is a device that can control other network devices through the network. When
this function is enabled, you can control playback of the unit from DMCs (such as Windows Media Player 12) on
the same network.
111
En