Yamaha MusicCast RX-V1083 Owner's Manual page 14

a
PHONO jacks
For connecting to a turntable (p.36).
b
AUDIO 1-3 jacks
For connecting to audio playback devices and inputting audio signals (p.36).
c
AV 1-4 jacks
For connecting to video/audio playback devices and inputting video/audio signals (p.34).
d
HDMI OUT 1 jack
For connecting to an HDMI-compatible TV and outputting video/audio signals (p.32). When using ARC, TV
audio signal can also be input through the HDMI OUT 1 jack.
HDMI OUT 2 (ZONE OUT) jack
For connecting to an HDMI-compatible TV and outputting video/audio signals (p.33), or for connecting to
an HDMI-compatible device used in Zone2 (p.95).
e
COMPONENT VIDEO (AV 1-2) jacks
For connecting to video playback devices that support component video and inputting video signals
(p.34).
f
HDMI (AV 1-7) jacks
For connecting to HDMI-compatible playback devices and inputting video/audio signals (p.34).
g
TRIGGER OUT 1-2 jacks
For connecting to devices that support the trigger function (p.40).
h
REMOTE IN/OUT jacks
For connecting to an infrared signal receiver/emitter that allows you to operate the unit and other
devices from another room (p.95).
i
NETWORK jack
For connecting to a network with a network cable (p.39).
j
Wireless antenna
For a wireless (Wi-Fi) connection to a network (p.51) and a Bluetooth connection (p.79).
k
RS-232C terminal
This is a control expansion terminal for custom installation. Consult your dealer for details.
l
AC IN jack
For connecting the supplied power cable (p.40).
m
ANTENNA jacks
For connecting to radio antennas (p.38).
n
ZONE OUT jacks
For connecting to the external amplifier used in Zone2 and for outputting audio (p.94).
o
SPEAKERS terminals
For connecting to speakers (p.17).
p
PRE OUT jacks
For connecting to a subwoofer with built-in amplifier (p.23) or to an external power amplifier (p.31).
14
En