Table of Contents
Advertisement
Connecting speaker cables
Speaker cables have two wires. One is for connecting the negative (-) terminal of the unit and
the speaker, and the other is for the positive (+) terminal. If the wires are colored to prevent
confusion, connect the black wire to the negative and the other wire to the positive terminal.
1
Remove approximately 10 mm (3/8") of insulation from the ends of the speaker cable, and
twist the bare wires of the cable firmly together.
2
Loosen the speaker terminal.
3
Insert the bare wires of the cable into the gap on the side (upper right or bottom left) of the
terminal.
4
Tighten the terminal.
3
3
F R
+ (red)
O N
T
2
2
1
1
4
4
– (black)
Using a banana plug
(Canada and China models only)
1
Tighten the speaker terminal.
2
Insert a banana plug into the end of the terminal.
1
1
F R
O N
T
Banana plug
2
2
Connecting the subwoofer (with built-in amplifier)
Use an audio pin cable to connect the subwoofer.
Audio pin cable
L
25
En
Advertisement
Table of Contents
