Event Status And Event Status Enable Registers - Fluke FL8808A User Manual

The ESE is a mask register that allows the host to enable or disable (mask) each bit in the
ESR. When a bit in the ESE is set to 1, the corresponding bit in the ESR is enabled.
When any enabled bit in the ESR changes from 0 to 1, the ESB bit in the STB also
changes to 1. When the ESR is read using the *ESR? command or cleared using the
*CLS command, the ESB bit in the STB returns to 0.
7
&
7
Summary Message
Event Summary Bit (ESB)
(Bit 5 of Status Byte Register)
Figure 4-3. Event Status and Event Status Enable Registers
Operating the Meter Using the Computer Interface
6 2
5 4 3
&
&
&
&
&
6 5 4 3 2
Standard
1 0
Event Status Register
*ESR?
&
&
Standard
1 Event Status Enable
0
Register
*ESE *ESE?
4
Status Registers
aam22f.eps
4-13