2) Sending automatic acknowledge (ACK BQ) with comply status
"UNABLE."
1. When the automatic acknowledge feature is active (AUTO ACK), the comply
status is "UNABLE" and a coast or ship call is received, the display shown
below appears, indicating that the auto acknowledge call with UNABLE (ACK
BQ) has been sent. The alarm sounds and the ALARM LED blinks two
minutes.
2. Press the CANCEL key to silence the alarm. The following display appears.
3. Press the ENT key.
4. Then, prepare a message and sent it following the procedures shown on in
paragraph 3.1.1.
3. DSC OPERATION FOR NON-DISTRESS CASES
Unable acknowledge
transmitted.
ROUTINE
TCmd1 : UNABLE
TCmd2 : BUSY
CH : NO INFO
CANCEL ALARM
** Send Message **
COAST BQ
TO : 123456789
ROUTINE
TCmd1 : UNABLE
TCmd2 : BUSY
CH : NO INFO
PRESS ENT
3-7