Priority - Furuno 9ZWFM8800S Operator's Manual

1. OPERATIONAL OVERVIEW
1.4

Priority

If one or more remote stations are installed, the transceiver unit (main unit) has
the highest priority. You can interrupt remote station operation at any time with
the handset of the main unit. When you hook off the handset of the main unit,
"OCCUPIED FM8800" is indicated on all remote stations.
Each remote station has its own priority. The remote station ID (1-4) indicates its
priority. The priority of the system is as follows.
DSC of main unit > Wing handset > Handset of main unit > 1 > 2 > 3 > 4
If you hook off No.4 remote station, for example, "Occupied Handset.4" is
displayed on other remote stations. However, you can hook off and use No.1
handset.
How to set priority of the remote station
Two persons are required to set priority on a remote station, one at the main unit
and one at the remote station.
1. Turn off the power at the main unit.
2. While pressing the MENU key of a remote station, turn the VOLUME/
POWER control clockwise on the main unit to turn on the power.
3. Press 1, 2, 3, or 4 key on the remote handset as appropriate followed by the
ENT key.
4. Turn off and on the power.
1-12
Version No.
0550216-01.00
Now ID=01
Input
New ID (1-4)=