JP14: PS/2 Keyboard Power On
Please note:
PS/2 keyboard power on will enable user to power on his computer by pressing the
designated key/keys on the PS/2 keyboard. To enable PS/2 keyboard power on,
set jumper JP14 to 1-2, and then enable the PS/2 keyboard power on function to
assign the key/keys of your choice inside the BIOS setup Menu.
JP17: STR Selection
Panel and Jumper Definition
1
Disable
(Default)
Pin No.
1-2 close PS/2 Keyboard Power
on Enable
2-3 close PS/2 Keyboard Power
on Disable (Default)
1
Disable
(Default)
Pin No.
1-2 close STR Enable
2-3 close STR Disable (Default)
32
1
Enable
Definition
1
Enable
Definition