Gigabyte GA-8TM User Manual page 18

3.Align CPU and insert it
5.Slip the bracket on to the CPU retention and press both end to clip it on the retention.
6.Make sure the CPU fan is plugged to the CPU fan connector, than install complete.
ATX 12V Power Supply
-Additional 4 pin connector for 12V current
-Backward compatibility maintained with load sharing capability
-Support 12V or 5V CPU VRs
Check power supply if it is supported by ATX12V Power Supply.
4.Use qualified fan approved by Intel.
Additional dedicated 12V
4-pin power connector
6Pin auxiliary ATX power
connector
ATX power connector
10
Installation Guide