A.5 Notices:
1.
In order for STR to function properly, the hardware devices,
such as AGP, Ethernet card, etc., and related drivers must be compliant
with ACPI specification.
2.
ATX power supply must comply with the ATX 12V Power 1.1 specification (1.0 amps of
5V Stand-By current is minimum requirement, 2.0 amps was preferred).
3.
Jumper JP12 is provided to connect to the STR LED in your system chassis. [Some
chassis may not provide this feature.] The STR LED will be illuminated when your
system is in STR sleep mode.
Suspend to RAM Installation
+
RIMM LED
STR LED Connector External
1
42