Cpu Installation - Gigabyte GA-8TM User Manual

8TM Motherboard
CPU Speed Setup
The system bus frequency can be switched at 100MHz - 133MHz by adjusting SW 1.
(The frequency ratio depend on CPU).
SW1 Select the System Speed at 100MHz - 133MHz (O: ON, X: OFF)
CPU CLK 1
*100MHz ON
105MHz OFF
110MHz OFF
133MHz ON
*We recommend you to setup your system speed to 100MHz.

CPU Installation

Please make sure the CPU should be supported to the motherboard.
CPU Top
Socket
Actuation
Lever
1.Pull the lever out, than lift up the Lever.
CPU Heat Sink Installation:
Beware: Please check that the heat sink is in good contact with the CPU before you turn on your
system. A poor contact will cause over heat, and might cause damage to your
processor!
2 3
ON ON
OFF ON
ON OFF
ON ON
Pin 1 Indicator
2.Please make sure the Pin1 indicator (gold
color) is aligned with 423pinsocket.
9
4
ON
ON
ON
OFF
CPU Bottom