Integrated Peripherals - Gigabyte GA-8ST667 User Manual

Integrated Peripherals

CMOS Setup Utility-Copyright (C) 1984-2002 Award Software
IDE1 Conductor Cable
IDE2 Conductor Cable
On-Chip Primary PCI IDE
On-Chip Secondary PCI IDE
AC97 Audio
USB Controller
USB Legacy Support
Onboard LAN device*
Init Display First
Onboard Serial Port 1
Onboard Serial Port 2
Onboard Parallel Port
Parallel Port Mode
x ECP Mode Use DMA
Game Port Address
Midi Port Address
Midi Port IRQ
: Move Enter:Select +/-/PU/PD:Value
F5:Previous Values
IDE1 Conductor Cable
Auto
ATA66/100/133
ATA33
* Only for GA-8ST667-L.
Integrated Peripherals
F6:Fail-Safe Defaults
Figure 4: Integrated Peripherals
Will be automatically detected by BIOS. (Default Value)
Set IDE1 Conductor Cable to ATA66/100/133 (Please make sure your IDE
device and cable is compatible with ATA66/100/133).
Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device
and cable is compatible with ATA33).
- 31 -
[Auto]
Item Help
[Auto]
Menu Level
[Enabled]
[Auto]
[Enabled]
Auto-detect IDE
[Enabled]
cable type
[Enabled]
[Disabled]
[ATA66/100/133]
[Enabled]
Set Conductor cable
[AGP]
to ATA66/100/133(80
[3F8/IRQ4]
-pins)
[2F8/IRQ3]
[378/IRQ7]
[ATA33]
[SPP]
Set Conductor cable
3
to ATA33(40-pins)
[201]
[330]
[10]
F10:Save ESC:Exit
F7:Optimized Defaults
F1:General Help
BIOS Setup