Resume By Alarm - Gigabyte GA-8ST667 User Manual

Power On by Mouse
Disabled Disable this function. (Default Value)
Enabled Enable Power On by move or click mouse function.

Resume by Alarm

You can set "Resume by Alarm" item to enabled and key in Data/time to power on system.
Disabled Disable this function. (Default Value)
Enabled Enable alarm function to POWER ON system.
If RTC Alarm Lead To Power On is Enabled.
Month Alarm :
Day (of Month) :
Time (hh : mm : ss) :
Power LED in S1 state
Blinking In standby mode(S1), power LED will blink. (Default Value)
Dual/OFF In standby mode(S1):
a. If use single color LED, power LED will turn off.
b. If use dual color LED, power LED will turn to another color.
NA, 1~12
1~31
(0~23) : (0~59) : (0~59)
- 37 -
BIOS Setup