Frequency/Voltage Control - Gigabyte GA-8ST667 User Manual

Frequency/Voltage Control

CMOS Setup Utility-Copyright (C) 1984-2002 Award Software
CPU Clock Ratio
Linear Frequency Control
x CPU Clock (MHz)
x DRAM Clock (MHz)
x AGP Clock (MHz)
x PCI Clock (MHz)
: Move Enter:Select +/-/PU/PD:Value F10:Save
F5:Previous Values
CPU Clock Ratio
This option will not be shown or not be available if you are using a CPU with the locked ratio.
10X~24X
Linear Frequency Control
Disabled
Enabled
CPU Clock (MHz)
100~355
Incorrect using it may cause your system broken. For power End-User use only!
DRAM Clock (MHz)
This feature allows you to adjust the DRAM frequency, When "Linear Frequency Control" is set
to Enabled.
Please set DRAM Clock according to your requirement.
If you use DDR200 DRAM module, please set "DRAM Clock(MHz)" to 100. If you use DDR333
DRAM module, please set "DRAM Clock(MHz)" to 166.
Incorrect using it may cause your system broken. For power End-User use only!
Frequency/Voltage Control
F6:Fail-Safe Defaults
Figure 8: Frequency/Voltage Control
It's depends on CPU Clock Ratio.
Disable this function. (Default value)
Enable this function.
Select CPU Clock to 100MHz~355MHz.
- 41 -
[15X] Item Help
[Disabled] Menu Level
100
AUTO
AUTO
AUTO
ESC:Exit
F7:Optimized Defaults
F1:General Help
BIOS Setup