Frequency/Voltage Control - Gigabyte GA-7VAXP-A Ultra User Manual

Frequency/Voltage Control

CMOS Setup Utility -Copy right (C) 1984-2003 Aw ard Softw are
Spread spectrum Modulated
CPU Host Clock Control
øCPU Host Frequency (MHz)
øPCI/AGP Frequency (MHz)
DRAM Clock(MHz)
CPU Voltage Control
AGP Ov erVoltage Control
DIMM Ov erVoltage Control
higf: Mov e Enter:Select +/-/PU/PD:Value F10:Sav e ESC:Ex it F1:General Help
F5:Prev ious Values F6:Fail-Safe Defaults F7:Optimized Defaults
øThose items will be available when "CPU Host Clock Control" is set to Enabled.
F Spread spectrum Modul ated
Set clock spread spectrum by auto.(Default value)
8Auto
Disable clock spread spectrum.
8Disabled
Enable clock spread spectrum.
8Enabled
F CPU Host Clock Control
Note: If system hangs up before ent e r CMOS setup utilit y , wait for 20 sec f o r times out reboot . When
time out occur, system will reset and run at CPU default Host clock at next boot.
Disable CPU Host Clock Control.(Default value)
8Disable
Enable CPU Host Clock Control.
8Enable
F CPU Host Frequency (MHz) (By swi tch SW1)
Set CPU Host Clock to 100MHz~132MHz.
8100
Set CPU Host Clock to 133MHz~165MHz.
8133
Set CPU Host Clock to 166MHz~200MHz.
8166
KT400A Series Motherboard
Frequency /Voltage Control
[Auto]
[Disable]
100
33/66
[By SPD]
[Auto]
[Auto]
[Auto]
Figure 8: Frequency /Volt a ge Control
- 54 -
Item Help
Menu Lev el u
Set CPU Ratio if
CPU Ratio is
unlocked.