Gigabyte GA-7VAXP-A Ultra User Manual page 48

FOnChip IDE Channel0
M When enabled, allows you to use the onboard primary PCI IDE. If a hard disk controller card is
used, set at Disabled.
Enable onboard 1st channel IDE port. (Default value)
8Enabled
Disable onboard 1st channel IDE port.
8Disabled
FOnChip IDE Channel1
M When enabled, allows you to use the onboard secondary PCI IDE. If a hard disk controller card is
used, set at Disabled.
Enable onboard 2nd channel IDE port. (Default value)
8Enabled
Disable onboard 2nd channel IDE port.
8Disabled
FIDE1 Conductor Cable
Will be automatically detected by BIOS (Default Value)
8Auto
8ATA66/100/133Set IDE1 Conductor Cable to ATA66/100/133 (Please make sure your IDE
device and cable is compatible with ATA66/100/133)
Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device
8ATA33
and cable is compatible with ATA33)
FIDE2 Conductor Cable
Will be automatically detected by BIOS (Default Value)
8Auto
8ATA66/100/133Set IDE2 Conductor Cable to ATA66/100/133 (Please make sure your IDE
device and cable is compatible with ATA66/100/133)
Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device
8ATA33
and cable is compatible with ATA33).
FAC97 Audio
Enabled Onchip AC97 controller. (Default value)
8Enabled
Disabled Onchip AC97 controller.
8Disabled
FUSB 1.1 Controller
M Disable this option if you are not using the onboard USB feature.
Enabled USB1.1 Controller. (Default value)
8Enabled
Disabled USB1.1 Controller.
8Disabled
KT400A Series Motherboard - 44 -