Section 5 - Maintenance
Filling
1.
If necessary, add the specified transmission oil through the dipstick receptacle to bring the level up to the maximum mark
on the dipstick.
NOTE: Always use the dipstick to determine the quantity of oil required.
Model
Technodrive 345‑A
2.
Clean and install the dipstick.
3.
Check the oil level. Refer to Checking.
Changing
1.
Remove the dipstick.
2.
Remove the transmission oil drain plug and drain the transmission into a suitable container.
3.
Contain and dispose of the oil and oil waste according to applicable regulations.
4.
Reinstall the transmission oil drain plug.
5.
Tighten the drain plug to the specified torque.
Description
Transmission oil drain plug
6.
Clean the exterior of the transmission around the oil filter assembly.
Page 50
c c
b
a
27922
Capacity
1.6 L (1.7 US qt)
Transmission drain plug
a -
Minimum oil level
b -
Maximum oil level
c -
Dipstick
Fluid type
API Class CD SAE 20 or
API Class CD SAE 30 engine oil
27977
Nm
17
90-8M0089579
Part Number
Obtain Locally
lb‑in.
lb‑ft
150
–
MARCH 2014
eng