Filling - Mercury 92‑813054A2 Manual

Section 5 - Maintenance
3. Remove the dipstick and observe the oil level. The oil level must be between the marks on the dipstick. If necessary, add
oil. See Filling.
a
4. Install engine oil dipstick

Filling

IMPORTANT: Do not overfill the engine with oil.
1. Remove the oil fill cap.
b
a
2. Add the specified oil to bring the oil level up to, but not over, the maximum mark on the dipstick.
a
QSD 2.0
Engine oil (with filter)
QSD 2.0
Engine oil (with filter)
Page 44
c
b
b
System Capacity
5.85 L (6.20 US qt)
System Capacity
6.00 L (6.30 US qt)
Engine oil level markings
a - Dipstick
b - Minimum operating level
c - Full mark and maximum operating level
14624
QSD 2.0L engine oil service
c
a - Engine cover with access panel removed
b - Engine oil fill cap
c - Engine oil dipstick
27986
33988
Engine Coolant Oil Cooler
15W40 4‑cycle Diesel Engine Oil
Engine Seawater Oil Cooler
15W40 4‑cycle Diesel Engine Oil
a - Coolant oil cooler
b - Seawater oil cooler
Fluid Type
Fluid Type
90-8M0069748
Part Number
92‑877695K1
Part Number
92‑877695K1
APRIL 2012
eng