Table of Contents
Advertisement
Change Fluid
Discharge of oil, coolant, or other engine/drive fluids into the environment is restricted by law. Use caution not to spill oil,
coolant, or other fluids into the environment when using or servicing your boat. Be aware of the local restrictions governing
the disposal or recycling of waste, and contain and dispose of fluids as required.
1.
Remove the fill cap and dipstick.
2.
Remove the transmission fluid drain plug and drain the transmission into a suitable container.
3.
Dispose of the waste according to local regulations.
4.
Reinstall the transmission fluid drain plug.
5.
Tighten the drain plug to the specified torque.
Description
Transmission fluid drain plug
6.
Clean the exterior of the transmission around the fluid filter assembly.
7.
Loosen the assembly nut, and rotate the securing tab in the direction shown.
90-8M0089579
MARCH 2014
eng
b
b
a
NOTICE
a -
Fill cap and dipstick
b -
Drain plug
a
24623
a -
Assembly nut
b -
Securing tab
24608
Section 5 - Maintenance
Nm
lb‑in.
17
150
Page 53
lb‑ft
Advertisement
Table of Contents
