Section 5 - Maintenance
Each day start
Each day end
Weekly
Every Two Months
Page 44
•
Check the engine oil level. (This interval can be extended based on operator experience with the
product.)
•
Check the engine coolant level.
•
Check the transmission oil level.
•
If operating in saltwater, brackish water, or polluted water, flush the seawater section of the
cooling system after each use.
•
Drain any water from the primary fuel filter after each use. (Drain any water from both fuel filters
if operating in freezing temperatures.)
•
Drain any water from the fuel filters.
•
Check the seawater inlets for debris or marine growth.
•
Check and clean the seawater strainer.
•
Check the battery connections and fluid level.
•
Treat the engine surfaces with Corrosion Guard if operating in saltwater, brackish water, or
polluted waters.
•
Inspect the air filter. (Inspect every two months or every 50 hours, whichever occurs first.)
•
Inspect the engine anodes and replace if eroded by 50% or more.
•
Ensure that the gauges and all wiring connections are secure.
•
Clean the gauges. (If operating in saltwater reduce the interval to every 25 hours or 30 days,
whichever occurs first.)
90-8M0089579
MARCH 2014
eng