Brinkmann 810-1750-S Installation Manual page 15

Gas Manifold Nut
10' Natural Gas Hose
Cooking Grills
Heat Shields
Warming Rack
810-8501-S MAIN & SIDE BURNERS
CAUTION: Some parts may contain sharp
edges. Wear protective gloves
if necessary.
Note: All orifices of the grill are double
orifices type (LP gas and natural
gas). You only remove the LP gas
orifice tip.
Note: Make sure all control knobs are in the
off position, LP tank valve is closed
and tank is disconnected from
regulator and removed from grill.
Step 3
Using an adjustable wrench to hold the gas
manifold connection secure, use a 3/4" wrench
to loosen the hose connection nut. Replace
existing LP hose/regulator assembly with natural
gas 10' hose assembly. Tighten the connection
carefully using two wrenches.
Step 4
Remove two screw from side burner bracket.
Carefully lift side burner up and away from valve
nozzle. Set aside for later use.
Step 5
Open hood and remove warming rack, cooking
grills and heat shields. Set aside for later use.
14