Table of Contents
Advertisement
User's Manual Draft 1.3.doc
1.1.1 Device Connection Options
The following information is displayed for each device:
1) The type of device, and optionally, a user-determined name for it.
2) Its connection status (Not available, available, connected, or cable-attached) and, if
applicable, the strength of its wireless signal.
3) A list of options for the device (at the base of its entry).
By clicking Connection for any device, the connection options will become available. If the
device is available but not currently connected, the connect button on this screen will allow
the device to be connected. Also, how the device connects in the future can be set from this
menu:
Auto Connect
Prompt Before
Connecting
The device will always auto connect with no prompting from the
user when it is nearby
In this mode, the device will prompt the user to connect through
a tray bubble when it is available
Page 9 of 24
Advertisement
Table of Contents
