Table of Contents Introduction Features ............................1 Package Contents........................2 Technical Specifications......................2 Installation............................3 Information ............................5...
USB 2.0 (or high-speed) devices. This includes such peripherals as scanners, printers, mass-storage devices, and high-resolution cameras. The Hub is self-powered, which allows you to cascade devices with additional hubs, so that up to 127 USB devices may be connected to a single port.
5° C ~ 40° C Storage Temperature: -20° C ~ 60° C Enclosure: Power Supply: Output: DC 5V, 3.8A Plug Size: 3.5 x 1.3 x 9.5mm Plug Polarity: Center-pin positive Main-Power-LED Color Definitions Off: Not operational Red: Operational Port-Status-LED Color Definitions...
Important Note: Please do not connect any USB devices to the Hub until instructed to do so in step 4 of this installation procedure. 1. Plug the AC adapter into a wall outlet or surge protector. Plug the DC connector into the DC power jack found on the rear of the Hub.
Page 7
NEC host controller with the exception of Adaptec. 4. Plug the USB A connector of the USB device, or an additional hub, into any of the downstream ports of the Hub. Important Note: When moving a device from one port on the Hub to another, it may be necessary to reinstall the USB drivers for that device.
F5U307 to which this declaration relates: Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 9
What is not covered by this warranty? All above warranties are null and void if the Belkin product is not provided to Belkin International, Inc., for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin International, Inc., determines that the Belkin product has been...
Page 10
Belkin product to Belkin International, Inc., for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin International, Inc., Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment.