Solid-State Drive (M.2) - HP PAVILION 15-BC514TX Maintenance And Service Manual

Solid-state drive (M.2)

Table 5-4 Solid-state drive descriptions and part numbers
Description
Solid state drive for use in the following models: 15-dp0000~0999
Optane memory module, 16 GB, PCIe
●
256 GB, PCIe
●
128 GB, SATA-3
●
Solid state drive for use in the following models:
● Optane memory module, 16 GB, PCIe (15-bc400~499 models)
● 128 GB, SATA-3. TLC (15-bc300~399 models, 15-bc400~499 models, 15-bc500~599 models)
● 256 GB, PCIe 3 × 4 SS, TLC (15-bc500~599 models)
512 GB, PCIe 3 × 4 SS, TLC (15-bc500~599 models)
●
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly
2. Remove the base enclosure (see
3. Disconnect the cable from the battery (see
Remove the solid-state drive:
▲ Remove the Phillips M2.0 × 3.0 screw (1), and then pull the solid-state drive away from the connector
(2).
Reverse this procedure to install the solid-state drive.
(Preparation for disassembly on page
Base enclosure on page
Battery on page
36).
36).
38).
Component replacement procedures
Spare part number
L43005-001
L44430-001
L43004-001
L27067-001
759848-032
847109-005
847110-002
43