Table of Contents
Advertisement
13.
Remove Phillips M2.5 × 3.0 screw from the top of each hinge bracket (1) and three broad head Phillips
M2.5 × 3.0 screws from each hinge (2). Remove the hinge brackets from the clips in the sides of the back
cover (3), and then lift the hinge brackets (4) to remove them.
Hinges are available as spare part number 856741-001.
14.
Remove the Phillips M2.0 × 2.0 screw from each hinge bracket (1), and then separate the hinge caps
from the hinge brackets (2).
All hinge covers and caps are available as spare part number 859737-001 for non-touch models and
856748-001 for touch models.
Component replacement procedures
65
Advertisement
Table of Contents
