Panasonic TH-49AF1U Operating Instructions Manual page 92

[Secondary backup input]
Sets the second priority backup input.
(None) / [OpenPort PLATFORM] / [HDMI1] /
[HDMI2] / [DVI-D]
The input that is of the same type as the one in use
for viewing will be greyed out.
[Auto switch back mode]
Sets whether or not to automatically return to the
former (main) input when the former input video
initially viewed is restored while viewing the video
of the backup input enabled by the operation of the
Backup Input function.
[Disable]:
Unreturned
[Enable]:
Returned
[Changing mode]
Select speed of input switching.
[High speed]:
If switching between the same signal formats, it is
possible to switch within 1 second.
If switching between the different signal formats,
picture noise is caused.
[Normal speed]:
If switching between the same signal formats, it is
possible to switch within 2 seconds.
If switching between the different signal formats, it
takes 3 to 4 seconds to switch but picture noise is
not caused.
●
The OpenPort PLATFORM input is treated as 1
125(1 080)/60p signal format equivalent.
[Backup input change]
Displays whether or not operating conditions for the
Backup Input function are met.
[Inactive]:
Indicates that the conditions are not met, and
inactivates the Backup Input function.
[Active]:
Indicates that the conditions are met, and activates
the Backup Input function.
[Main input]
Displays the (main) input initially used for viewing.
[Current input]
Displays whether the input currently in use for viewing
is the (main) input initially used for viewing or the
backup one.
92
English
Setting conditions
The following table describes restrictions (available
combinations) on each setting item.
OpenPort
PLATFORM
HDMI1
HDMI2
DVI-D
OpenPort
PLATFORM
HDMI1
HDMI2
DVI-D
Main
PC
COMPONENT*
VIDEO
USB
○: S electable for both Primary and Secondary.
×: Not selectable for neither Primary nor Secondary.
: [COMPONENT] may be displayed as [RGB]
*
depending on the settings of [Component/RGB-in
select]. (see page 78)
Recall display
Pressing <RECALL> displays any of the followings.
●
When the main input is being used for viewing and
the operating conditions for the Backup Input function
are met.
HDMI1
16:9
Main input
Backup OK
● When the backup input, enabled by the operation of
the Backup Input function, is being used for viewing.
HDMI1
16:9
Backup Input
DVI
When the conditions for the Backup Input function
are met, the following screen is displayed.
Main input
Backup OK
Backup
PC
COMPONENT* USB
VIDEO
× × ×
○ × ×
× × ×
× × ×