Panasonic TH-49AF1U Operating Instructions Manual page 69

[H-position] Adjust the horizontal position with
[H-size] Adjust the horizontal size with
[V-position] Adjust the vertical position with
[V-size]
Adjust the vertical size with
[Clock (For RGB IN or PC IN input)
phase]
In some cases, frame of the screen
appears blurred or smudged, when RGB
signal or PC signal are input.
[Dot clock] (For RGB IN or PC IN input)
Periodic striped pattern interference
(noise) may occur when a striped pattern
is displayed. If this happens, adjust so
that any such noise is minimized.
[Over scan] Turn image over scan On/Off.
Applicable input signal:
525i, 525p, 625i, 625p, 750/60p, 750/50p
(Component Video, RGB, DVI-D, HDMI)
[On]
Note
● When [Off] is set, [H-size] and [V-size]
cannot be adjusted.
[1:1 pixel Adjusts the display size when 1125i or
mode] 1125p signal is input.
[Off]
Applicable input signal:
1125 / 50i, 60i, 24PsF, 24p, 25p, 30p,
50p, 60p
Note
● Select [Off] when flickering is shown
around the image.
● [H-size] and [V-size] cannot be
adjusted when [On] is selected.
.
Note
●
In some cases, noise appears outside the area
picture is displayed, but it is not a malfunction.
.
.
.
[Off]
[On]
69
English