OpenPort
PLATFORM
Shutdown
It is possible to force OpenPort PLATFORM system to
shutdown in the following way.
1
Press <SETUP> to display the [Setup]
menu.
2
Select [OSD language] with
and press <ENTER> for more than 3
seconds.
The following screen will be displayed.
Options
Display software information
Software licenses
USB data cloning
Shipping
OpenPort PLATFORM Shutdown
3
Select [OpenPort PLATFORM
Shutdown] with
<ENTER>.
YES
4
Select [YES] with
<ENTER>.
When it is being shutdown, the power indicator
turns green to orange and the message [Shutting
down OpenPort PLATFORM. Please wait.] is
displayed. After that, shifts to standby condition
(Power Indicator: Red).
114
English
and press
Shutdown
NO
and press
Note
●
Remote control operation and external control
command are not valid while OpenPort PLATFORM
system.
●
When the power is turned on after OpenPort
PLATFORM system is shutdown and in standby
condition (Power Indicator: Red), only <Standby (ON/
OFF) button> and "PON" command from SERIAL
terminal are valid.
●
The display may be greyed out in some conditions,
such as when the OpenPort PLATFORM system is
starting up. In this case, the OpenPort PLATFORM
cannot be shut down.