Panasonic TH-49AF1U Operating Instructions Manual page 87

2
Select the numeric button with
and set the function to assign with
.
■
Functions assignable to the numeric
buttons
[Input] (Direct input select)
Input can be selected with single-touch operation.
[OpenPort PLATFORM] / [HDMI1] / [HDMI2] /
[DVI-D] / [PC] / [COMPONENT]* / [VIDEO] /
[USB]
: [COMPONENT] may be displayed as [RGB]
*
depending on the settings of [Component/RGB-
in select]. (see page 78)
●
Button <6> already has functions to select the
OpenPort PLATFORM input with single-touch
operation and display the software keyboard
(see page 43) during the OpenPort PLATFORM
input. This setting cannot be changed.
[Memory load]
Memory can be loaded with single-touch operation.
Memory load (see page 75)
[MEMORY1] to [MEMORY5]
●
[MEMORY1] to [MEMORY5] load functions are
already assigned to <1> to <5> respectively.
These settings cannot be changed.
[KEYBOARD]
●
Button <6> already has the function to display
the software keyboard (see page 43) during
the OpenPort PLATFORM input. No specific
functions are assigned for inputs other than the
OpenPort PLATFORM input. This setting cannot
be changed.
[Shortcut]
[Signal], [Screensaver], [Set up timer], [Power
management settings], [Multi display settings]
●
Pressing the numeric button displays the menu
screen. Pressing the button again exits the
menu screen.
[AV mute]
●
Pressing the numeric button mutes the audio
and pictures.
To cancel, press any button on the remote
control except the <Standby (ON/OFF) button>.
[Digital zoom]
●
Switches to [Digital zoom] mode by pressing
numeric buttons. (see page 65)
[KEYBOARD]
●
Button <6> already has the function to display
the software keyboard (see page 43) during
the OpenPort PLATFORM input. No specific
functions are assigned for inputs other than the
OpenPort PLATFORM input. This setting cannot
be changed.
Shipping condition
The following functions are assigned to the numeric
buttons as factory default.
[Input]
1 HDMI1
2 HDMI2
3 DVI-D
4 PC
5 COMPONENT
OpenPort
6 PLATFORM /
KEYBOARD
■
[Function button guide]
Sets the function display when numeric buttons are
pressed. Set this for each function group.
[On]:
Displays the function list for the numeric buttons.
[Off]:
Does not display the function list. Operation starts
when numeric buttons are pressed.
Note
●
When <FUNCTION> is pressed, [Function button
guide] will be displayed regardless of the [On] / [Off]
settings.
[Memory
[Shortcut]
load]
MEMORY1 [Signal]
MEMORY2 [Screensaver]
MEMORY3 [Set up timer]
[Power
MEMORY4 management
settings]
MEMORY5 [AV mute]
---- / ---- /
KEYBOARD KEYBOARD
English
87