Panasonic TH-49AF1U Operating Instructions Manual page 83

●
For TH-55AF1U, TH-49AF1U and TH-42AF1U,
when the power is turned off, the OpenPort
PLATFORM system is shutdown once, and then
restarted. During that time (approx. 60 seconds),
the power on processing by detecting pictures
(sync signal) is not accepted.
[HDMI2 power management]
When this function is set to [On], it operates under the
following conditions to turn the power on or off automatically.
When no pictures (sync signal) are detected for
60 seconds or so at HDMI2 input:
Power is turned off (sleep); the power indicator
lights up orange.
When pictures (sync signal) are subsequently
detected at HDMI2 input:
Power is turned on; the power indicator lights up
green.
Note
●
This function may not operate depending on the
video output devices.
●
For TH-55AF1U, TH-49AF1U and TH-42AF1U,
when the power is turned off, the OpenPort
PLATFORM system is shutdown once, and then
restarted. During that time (approx. 60 seconds),
the power on processing by detecting pictures
(sync signal) is not accepted.
[DVI-D power management]
When this function is set to [On], it operates under
the following conditions to turn the power on or off
automatically.
When no pictures (sync signal) are detected for
60 seconds or so at DVI-D input:
Power is turned off (sleep); the power indicator
lights up orange.
When pictures (sync signal) are subsequently
detected at DVI-D input:
Power is turned on; the power indicator lights up
green.
Note
●
This function may not operate depending on the
video output devices.
● For TH-55AF1U, TH-49AF1U and TH-42AF1U,
when the power is turned off, the OpenPort
PLATFORM system is shutdown once, and then
restarted. During that time (approx. 60 seconds),
the power on processing by detecting pictures
(sync signal) is not accepted.
[PC power management] (DPMS function)
When this function is set to [On], it operates under
the following conditions to turn the power on or off
automatically.
When no pictures (HD/VD sync signals) are
detected for 60 seconds or so at PC input:
Power is turned off (sleep); the power indicator
lights up orange.
When pictures (HD/VD sync signals) are
subsequently detected at PC input:
Power is turned on; the power indicator lights up
green.
Note
●
This function is effective when [Sync] in [Signal] is
set to [Auto] or [HV sync] and [Component/RGB-in
select] are set to [RGB]. (see page 78)
●
This function may not operate depending on the
video output devices.
●
For TH-55AF1U, TH-49AF1U and TH-42AF1U,
when the power is turned off, the OpenPort
PLATFORM system is shutdown once, and then
restarted. During that time (approx. 60 seconds),
the power on processing by detecting pictures (HD/
VD sync signals) is not accepted.
[Power save]
This function adjusts the brightness of the backlight to
reduce power consumption.
[Off]:
This function does not operate.
[On]:
Backlight brightness is reduced.
Note
● If [Input search] is set to items other than [Off], the
[Input search] function is prioritised. (The "Power
management" function does not operate for each
terminal.) (For details of [Input search] function,
see page 90.)
●
If [Failover/Failback] - [Input change mode] is set
to items other than [Off], the [Failover/Failback]
function is prioritised. (The "Power management"
function does not operate for each terminal.) (For
details of [Failover/Failback] function, see page
91.)
83
English